Difference between revisions of "Add Layer"

Revision as of 11:25, 24 November 2024

Clicking on Add will open the window below (Figure 1). Depending on your data format, you can upload a Table, a Raster or a Shapefile. You then need to select a Category (choose that is closest to your type of data, this is only required to store the layer). You can optionally provide a Description of your dataset. Finally select your file and click Upload.

File:DataUpload.JPG

Table

Make sure that your table meets the following standards:

Format: Only a semicolon delimited file ('*.csv') is valid.

Headers: the first line of the table is considered as headers, which have to be denoted correctly as described below. The names must not contain any special characters or non-stadard lettering (such as 'ü' or ð).

Required Columns: 3 columns (Index, Latitude and Longitude) are required.

- acceptable index column name: Index

- acceptable latitude column name: Latitude, Lat, Y, North, Northing

- acceptable longitude column name: Longitude, Lon, X, East, Easting

Make sure that the first data line (i.e. the second line of your table) is filled with numerical values and not left empty even if no measurement exists. Otherwise the whole column will be treated as a string and can not be used as numerical data.

Example Table (VAR1 and VAR2 are arbitrary variable)

Coverage (Raster)

Format: Only one band *.tif format is valid.

MORE TESTING IS REQUIRED TO FINISH THIS PAGE - STILL TOO MANY ISSUES.

Make sure to use the valid projection (WGS84) for your raster layer.

Shapefile

 Format: Only compressed zip file is valid.
 Contents: The zip file must contain *.dpf, *.prj, *.sbn, *.shp, *.shx, *.sbx files. 
 NOTE: Make sure files are direclty in the zip folder.

Example:

Contents of zip file

Make sure to use the valid projection (WGS84) for your raster layer.

Valid projection

Geographic Coordinate System: GCS_WGS_1984

Datum: D_WGS_1984

Prime Meridian: Greenwich

Angular Unit: Degree

EPSG:4326

For more information check WGS84